1-1/2" Closed Cell Backer Rod - 53 ft
12- 53” rods
Closed Cell Polyethylene Foam
Meets SATM C1330 Type C
Made without CFC’s or HCFC’s
PRODUCT DESCRIPTION
Backer Rod is a closed cell, resilient, polyethylene backerrod used as a backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants. Sealants will not adhere to it; no bond breaker is required.
COMPOSITION AND MATERIALS
Backer Rod is a round, black, resilient, extruded closed cell polyethylene backer rod with a water resistant outer skin. It is compatible with most known cold applied sealants such as urethane, silicone, acrylic, butyl, polysulfides, latex, and chinking sealants.
SPECIFIC USES INCLUDE
- Expansion joints
- Highway joints
- Glazing
- Log home chinking
- Parking Decks
LIMITATIONS
Backer Rod should be installed with a roller or blunt, flat-sided tool. Please follow sealant manufacturer specifications for recommended sealant width and depth ratio. For best results, do not puncture, fold or overly stretch the product. The product is made with a water-resistant outer skin, therefore where moisture resistance is important, care should be taken not to puncture this outer surface skin.
Backer Rod is chemically inert and will resist gasoline, oil, and most solvents. Product will not stain or adhere to sealants.
Density: 1.3-1.9 lbs/ft3
Water Absorption: less than 0.5% by volume
< 0.03 grams/cc
Temperature range: -90ÆF to 190ÆF
Compression Recovery: > 90%
Compression Deflection: 5 psi
Tensile Strength: > 29 psi
Meets standards ASTM D5249 type 3 and ASTM C1330 type C
