FILL-RITE (2"x72") 2-inch Grey Backer Rod—4 Pack

When you need a resilient material for construction joints, there’s no better option than a polyethylene backer rod. The outer skin is water resistant, which makes it perfect for use in a variety of environmental conditions. Get your FILL-RITE 2” x 72” grey backer rod 4-pack today! Contact us to learn more about our foam construction products.

4 Pack of our 2 inch backer rod in grey. Each piece is approximately 72 inches long. 24 feet total of backer rod.

Closed-Cell Polyethylene Foam
Meets SATM C1330 Type C
Made without CFC’s or HCFC’s

PRODUCT DESCRIPTION
Backer Rod is a closed-cell, resilient, polyethylene backer rod used as a backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants. Sealants will not adhere to it; no bond breaker is required.

COMPOSITION AND MATERIALS
Backer Rod is a round, black, resilient, extruded closed cell polyethylene backer rod with a water-resistant outer skin. It is compatible with most known cold applied sealants such as urethane, silicone, acrylic, butyl, polysulfides, latex, and chinking sealants.

 SPECIFIC USES INCLUDE

• Expansion joints
• Highway joints
• Curtain wall joints
• Pavement joints and repairs
• Partitions
• Window and door applications
• Precast concrete coping
• Glazing
• Log home chinking
• Parking decks
• Pool decks

LIMITATIONS

Closed-Cell Foam Backer Rod should be installed with a roller or blunt, flat-sided tool. Please follow sealant manufacturer specifications for recommended sealant width and depth ratio. For best results, do not puncture, fold or overly stretch the product. The product is made with a water-resistant outer skin, therefore where moisture resistance is important, care should be taken not to puncture this outer surface skin.